Urgent Thesis Revision and Research Validation
Budget / Salary$30–250
TypeFreelance project
LocationRemote
Posted2 hours ago
URGENT: Thesis Revision and Improvement Needed ASAP
I am urgently looking for someone with strong experience in **academic thesis writing, reviewing, research analysis, and revisions.
I have already completed the majority of my thesis, but I recently received feedback from my supervisors requiring several changes and improvements.
Important information:
- The thesis is mostly completed, so the task is primarily to **revise, improve, and correct the existing work, rather than write it from scratch.
- To be fully transparent, the current thesis contains fabricated data. I need someone with strong analytical skills who can identify inconsistencies and help make the research and analysis academically defensible, using verifiable data or clearly identified simulated data where appropriate.
- The highest priority is addressing all supervisor feedback and ensuring the revised thesis meets the specified requirements.
- I am looking for someone who has previously worked on theses, academic research, or thesis reviews and understands how to produce coherent, consistent, high-quality academic work.
Files provided:
There will be 3 files in total:
1. Main Thesis (Highest Priority):The existing thesis that needs to be revised and improved.
2. Supporting File 1:Additional document related to reporting the changes made.
3. Supporting File 2: Additional document required for the final submission.
4. Several Files fromm past student's thesis as an example.
You may review all three files to understand the requirements and scope of the work.
Deadline: This is extremely urgent. I need someone who can start immediately and complete the revisions as soon as possible.
Main goal Deliver a thoroughly revised, logically consistent thesis that addresses all supervisor feedback, along with the two required supporting documents.
Here is the feedback: (Below)
Issue 1: Hypotheses do not match the tests actually conducted
H1–H3 refer to employment status, perceived job readiness and retention. However, your regression has only one dependent variable, Job Satisfaction and Market Alignment. Job Insecurity, the strongest predictor in your model, has no hypothesis at all. As a result, the thesis never states which hypotheses are supported and which are not.
Rewrite H1–H3 so that they refer only to the variables you actually measured, and add an H4 for Job Insecurity. At the end of the results section, add a hypothesis-testing summary table listing each hypothesis, the test used, the key statistics (β, p) and the decision (supported or not supported). In the limitations section, state openly that constructs in the original design, such as employment status and retention, could not be tested with the fixed questionnaire.
Issue 2: Variable construction and reliability are not reported
The thesis never explains which items make up each of the six analysis variables. Some items point in opposite directions: for example, “My problem-solving skills meet employers’ expectations” versus “There is a gap between my skills and what employers expect”, or “I feel confident I will achieve stable employment” versus the anxiety items. If these were averaged without reverse-coding, the composite scores are distorted. In addition, the item count of 23 suggests that the overall α of 0.841 includes the three demographic questions, which makes it meaningless.
Add a table that maps each item to its variable and marks the reverse-coded items. Using the existing data, recalculate α on the Likert items only, separately for each sub-scale. Report any α below 0.7 honestly and discuss it as a limitation. Your methods chapter says factor analysis was conducted; if it was not, delete that claim.
Issue 3: The descriptive statistics table contains anomalies and must be checked against the raw output
Several pairs or groups of different items have exactly the same mean and standard deviation:
“My education has adequately prepared me” and “Employers value my academic background” are both M = 3.975, SD = 1.1537;
“My problem-solving skills meet employers’ expectations” and “There is a gap between my skills and what employers expect”, which mean opposite things, are both M = 3.270, SD = 1.3514;
“Entry-level jobs are becoming harder to find”, “I actively seek to learn new digital skills” and “I feel confident that I will achieve stable employment” are all M = 3.560, SD = 1.4481;
“My job expectations are realistic” and “The job market provides enough stable and meaningful roles” are both M = 3.920, SD = 1.2211.
With 200 respondents, this is almost impossible to occur naturally. Check every item against the original SPSS output and correct the table. If the raw data really are identical, explain the reason. Unless this is resolved, none of the later analyses can be considered credible.
Issue 4: Regression and correlation results are misreported and misinterpreted
There are five specific problems.
No collinearity diagnostics are reported, although Employability Skills and Technological Disruption correlate at 0.68, and Technological Disruption and Job Insecurity at 0.63.
Technological Disruption changes sign (r = +0.25, β = −0.25), which is a classic suppression effect, yet the text explains it in two contradictory ways.
Unstandardized B and standardized β are used interchangeably, with β written as “b” in places. The text also contains clearly wrong statements such as “job insecurity (b = 0.537) is the least negative value”.
The finding that higher job insecurity goes with higher satisfaction is counterintuitive and is not properly discussed. It may itself result from a reverse-coding error, so check it together with Issue 2.
The correlation results are shown only as a Python heatmap with no p-values or sample size, and Pearson correlation is applied to categorical variables such as gender and employment status.
In addition, replace causal verbs throughout the results, discussion and conclusion (impact, determine, affect, lead to) with “is associated with” or “predicts”. Add one sentence in both the methods and the discussion stating that a cross-sectional design supports only correlational inferences. In both the Chinese and English abstracts, remove or soften conclusions your data did not test, such as “leads to underemployment” and “mental health deterioration”.
Issue 5: The methods chapter does not describe what was actually done
Chapter 3 claims stratified random sampling and high external validity. Chapter 4, however, describes purposive sampling through LinkedIn and university portals, which is in fact non-probability purposive and convenience sampling. Chapter 3 also claims a 20-person pilot study, factor analysis and ethics committee approval, and the whole chapter is written in the present tense, as if it were still a research proposal. In addition, the research objectives and hypotheses are repeated word for word in Chapters 1 and 3.
Delete all references to stratified random sampling and its claimed external validity, describe the actual non-probability sampling accurately, and state in the limitations that the findings cannot be generalised to the whole Generation Z population. For the pilot study, factor analysis and ethics approval: if they were actually done, add the specific details; if not, delete them. Rewrite the methods chapter in the past tense, and remove the duplicated objectives and hypotheses from Chapter 3.
I am urgently looking for someone with strong experience in **academic thesis writing, reviewing, research analysis, and revisions.
I have already completed the majority of my thesis, but I recently received feedback from my supervisors requiring several changes and improvements.
Important information:
- The thesis is mostly completed, so the task is primarily to **revise, improve, and correct the existing work, rather than write it from scratch.
- To be fully transparent, the current thesis contains fabricated data. I need someone with strong analytical skills who can identify inconsistencies and help make the research and analysis academically defensible, using verifiable data or clearly identified simulated data where appropriate.
- The highest priority is addressing all supervisor feedback and ensuring the revised thesis meets the specified requirements.
- I am looking for someone who has previously worked on theses, academic research, or thesis reviews and understands how to produce coherent, consistent, high-quality academic work.
Files provided:
There will be 3 files in total:
1. Main Thesis (Highest Priority):The existing thesis that needs to be revised and improved.
2. Supporting File 1:Additional document related to reporting the changes made.
3. Supporting File 2: Additional document required for the final submission.
4. Several Files fromm past student's thesis as an example.
You may review all three files to understand the requirements and scope of the work.
Deadline: This is extremely urgent. I need someone who can start immediately and complete the revisions as soon as possible.
Main goal Deliver a thoroughly revised, logically consistent thesis that addresses all supervisor feedback, along with the two required supporting documents.
Here is the feedback: (Below)
Issue 1: Hypotheses do not match the tests actually conducted
H1–H3 refer to employment status, perceived job readiness and retention. However, your regression has only one dependent variable, Job Satisfaction and Market Alignment. Job Insecurity, the strongest predictor in your model, has no hypothesis at all. As a result, the thesis never states which hypotheses are supported and which are not.
Rewrite H1–H3 so that they refer only to the variables you actually measured, and add an H4 for Job Insecurity. At the end of the results section, add a hypothesis-testing summary table listing each hypothesis, the test used, the key statistics (β, p) and the decision (supported or not supported). In the limitations section, state openly that constructs in the original design, such as employment status and retention, could not be tested with the fixed questionnaire.
Issue 2: Variable construction and reliability are not reported
The thesis never explains which items make up each of the six analysis variables. Some items point in opposite directions: for example, “My problem-solving skills meet employers’ expectations” versus “There is a gap between my skills and what employers expect”, or “I feel confident I will achieve stable employment” versus the anxiety items. If these were averaged without reverse-coding, the composite scores are distorted. In addition, the item count of 23 suggests that the overall α of 0.841 includes the three demographic questions, which makes it meaningless.
Add a table that maps each item to its variable and marks the reverse-coded items. Using the existing data, recalculate α on the Likert items only, separately for each sub-scale. Report any α below 0.7 honestly and discuss it as a limitation. Your methods chapter says factor analysis was conducted; if it was not, delete that claim.
Issue 3: The descriptive statistics table contains anomalies and must be checked against the raw output
Several pairs or groups of different items have exactly the same mean and standard deviation:
“My education has adequately prepared me” and “Employers value my academic background” are both M = 3.975, SD = 1.1537;
“My problem-solving skills meet employers’ expectations” and “There is a gap between my skills and what employers expect”, which mean opposite things, are both M = 3.270, SD = 1.3514;
“Entry-level jobs are becoming harder to find”, “I actively seek to learn new digital skills” and “I feel confident that I will achieve stable employment” are all M = 3.560, SD = 1.4481;
“My job expectations are realistic” and “The job market provides enough stable and meaningful roles” are both M = 3.920, SD = 1.2211.
With 200 respondents, this is almost impossible to occur naturally. Check every item against the original SPSS output and correct the table. If the raw data really are identical, explain the reason. Unless this is resolved, none of the later analyses can be considered credible.
Issue 4: Regression and correlation results are misreported and misinterpreted
There are five specific problems.
No collinearity diagnostics are reported, although Employability Skills and Technological Disruption correlate at 0.68, and Technological Disruption and Job Insecurity at 0.63.
Technological Disruption changes sign (r = +0.25, β = −0.25), which is a classic suppression effect, yet the text explains it in two contradictory ways.
Unstandardized B and standardized β are used interchangeably, with β written as “b” in places. The text also contains clearly wrong statements such as “job insecurity (b = 0.537) is the least negative value”.
The finding that higher job insecurity goes with higher satisfaction is counterintuitive and is not properly discussed. It may itself result from a reverse-coding error, so check it together with Issue 2.
The correlation results are shown only as a Python heatmap with no p-values or sample size, and Pearson correlation is applied to categorical variables such as gender and employment status.
In addition, replace causal verbs throughout the results, discussion and conclusion (impact, determine, affect, lead to) with “is associated with” or “predicts”. Add one sentence in both the methods and the discussion stating that a cross-sectional design supports only correlational inferences. In both the Chinese and English abstracts, remove or soften conclusions your data did not test, such as “leads to underemployment” and “mental health deterioration”.
Issue 5: The methods chapter does not describe what was actually done
Chapter 3 claims stratified random sampling and high external validity. Chapter 4, however, describes purposive sampling through LinkedIn and university portals, which is in fact non-probability purposive and convenience sampling. Chapter 3 also claims a 20-person pilot study, factor analysis and ethics committee approval, and the whole chapter is written in the present tense, as if it were still a research proposal. In addition, the research objectives and hypotheses are repeated word for word in Chapters 1 and 3.
Delete all references to stratified random sampling and its claimed external validity, describe the actual non-probability sampling accurately, and state in the limitations that the findings cannot be generalised to the whole Generation Z population. For the pilot study, factor analysis and ethics approval: if they were actually done, add the specific details; if not, delete them. Rewrite the methods chapter in the past tense, and remove the duplicated objectives and hypotheses from Chapter 3.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.