3D Printable 1/2" Y-Fitting Design
Budget / Salary$25–75
TypeFreelance project
LocationRemote
Posted1 hour ago
I’m building a compact fluid system and need a precise 3D model of a Y-shaped fitting that I can send straight to my printer. The part must:
• Handle water or other water-based liquids without leaks
• Mate to 1/2-inch-inner-diameter lines using threaded ends that screw directly onto the matching fittings I already use
• Stay small—roughly half-inch footprint per branch—so it fits in a tight enclosure
Give me a print-ready STL plus an editable file (STEP, Fusion 360, or similar) so I can adjust wall thickness later if required. Internal flow paths should be smooth, the thread geometry accurate, and the design oriented to minimise support material on a standard FDM printer.
Once the model is ready I’ll run a quick dimensional check; if everything matches the spec and the first print passes a simple leak test, we’re done.
• Handle water or other water-based liquids without leaks
• Mate to 1/2-inch-inner-diameter lines using threaded ends that screw directly onto the matching fittings I already use
• Stay small—roughly half-inch footprint per branch—so it fits in a tight enclosure
Give me a print-ready STL plus an editable file (STEP, Fusion 360, or similar) so I can adjust wall thickness later if required. Internal flow paths should be smooth, the thread geometry accurate, and the design oriented to minimise support material on a standard FDM printer.
Once the model is ready I’ll run a quick dimensional check; if everything matches the spec and the first print passes a simple leak test, we’re done.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.