Wi-SUN RF Module PCB Design
Budget / SalaryHourly project
TypeFreelance project
LocationRemote
Posted10 hours ago
Design RF IOT Modules for WiSUN for India / North America - project needs the schematic capture and PCB layout, in Altium Designer, of a low-cost Wi-SUN FAN 1.1 sub-GHz radio module for smart meters.
The module is a re-spin of the existing EFR32FG25 module onto the larger-memory, OFDM-capable EFR32FG25B222F1920IM56, with a maximum transmit power of +16 dBm from the SoC's integrated PA.
There is no external PA, and no additional power supply: the module runs from the host 3.3 V rail.
The module keeps the existing outline, 29-pad LGA footprint and host pin-out, so it is drop-in compatible with existing hosts. Two band variants are built from one PCB, selected by fitted RF components:
India: 865–868 MHz.
North America and Paraguay: 902–928 MHz (one common design).
Scope of Work
In scope
Altium Designer project set-up from the Customer's existing projects and templates.
Schematic capture for both band variants, using Altium's Variant Manager for the band-specific parts.
Component selection and library work (schematic symbols, footprints, 3D models, parameters).
RF circuit design: balun, harmonic low-pass filter and RX matching starting values for 865–868 MHz and 902–928 MHz, from the reference design and Silicon Labs guidance.
PCB placement and routing, including RF, crystal, DC-DC and decoupling layout.
Design rule set-up, ERC and DRC clean-up, and the manufacturing output package.
Three design reviews with the Customer (schematic, placement, routing).
One post-prototype ECO round: component value changes from the Customer's RF tuning, and small layout fixes (Section 9).
The module is a re-spin of the existing EFR32FG25 module onto the larger-memory, OFDM-capable EFR32FG25B222F1920IM56, with a maximum transmit power of +16 dBm from the SoC's integrated PA.
There is no external PA, and no additional power supply: the module runs from the host 3.3 V rail.
The module keeps the existing outline, 29-pad LGA footprint and host pin-out, so it is drop-in compatible with existing hosts. Two band variants are built from one PCB, selected by fitted RF components:
India: 865–868 MHz.
North America and Paraguay: 902–928 MHz (one common design).
Scope of Work
In scope
Altium Designer project set-up from the Customer's existing projects and templates.
Schematic capture for both band variants, using Altium's Variant Manager for the band-specific parts.
Component selection and library work (schematic symbols, footprints, 3D models, parameters).
RF circuit design: balun, harmonic low-pass filter and RX matching starting values for 865–868 MHz and 902–928 MHz, from the reference design and Silicon Labs guidance.
PCB placement and routing, including RF, crystal, DC-DC and decoupling layout.
Design rule set-up, ERC and DRC clean-up, and the manufacturing output package.
Three design reviews with the Customer (schematic, placement, routing).
One post-prototype ECO round: component value changes from the Customer's RF tuning, and small layout fixes (Section 9).
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.