Vissim Signals, Conflicts, Parking Coding

I have a corridor already laid out in Vissim and now need every operational detail brought to life. All signal heads, conflict areas, and parking elements must be fully coded so the model runs exactly as my Synchro-based timing plans intend.

Here is what I will hand over at the start:
• The current Synchro *.syn file (with timing sheets and phase diagrams)
• The RBCs exported from Synchro
• The base Vissim network geometry

Your task is to take those inputs and:
• Insert and configure all signal heads, assigning the correct timing and phases from my Synchro file.
• Build out every conflict area, specifying conflict zone types, traffic-flow patterns, and vehicle interaction rules so lane-changing and gap-acceptance behave realistically and also add detectors.
• Add the parking elements (on-street bays) and set their capacities.

Acceptance criteria
1. The completed .inpx file opens with no errors or missing objects.
2. Signal groups display the exact timings and phase sequences found in the Synchro printout.
3. Vehicle interactions in each conflict area match the defined zone type and flow pattern when tested under a 15-minute simulation run.
4. Parking occupancy follows the dwell-time inputs and does not create phantom queues.

If you are confident working in PTV Vissim, and can read Synchro outputs quickly, I’m ready to share the files and move ahead.