Urgent!!! - Moldex3D RTM Optimization
Budget / Salary$10–30
TypeFreelance project
LocationRemote
Posted1 hour ago
Urgent - only freelancers who have Moldex 3D tools apply.
This is urgent project needed to complete in a few hours and freelancers without Moldex 3D tools are not considered.
Part 1
Using Moldex 3D, simulate the Resin Transfer Molding (RTM) process for the prepared solid mesh and ply orientation (attached mfe and kpt files). Review the instructions provided in this link to complete the simulation work:
RTM Simulation Files.zipDownload RTM Simulation Files.zip
https://www.moldex3d.com/blog/tips-and-tricks/composite-2023-how-to-set-rtm-ply-layout-in-studio/Links to an external site.
Your analysis should address the following:
Optimize Pressure:Determine the ideal pressure required to completely fill the part without defects, ensuring no issues arise during the process.
Material Comparison:Select two different combinations of materials for the plies and resin. Run the simulation with consistent process parameters for each combination. Compare the results, focusing on the pressure required, filling time, and warpage. Consider material properties such as porosity and permeability in your evaluation.
Part 2
Use the attached step file and follow the instructions provided in this video to prepare the mesh and orientation needed to run an RTM simulation on the given geometry.
RTM Training.stpDownload RTM Training.stp
https://www.youtube.com/watch?v=xHehZITTSMMLinks to an external site.
Part 3 – Optional (you will receive 10% on your midterm exam grade by completing this part)
Use the mesh and ply orientation prepared in Part 2 and run an RTM simulation.
Impact of Ply Orientation: Modify the orientation of the plies and analyze the effects on the necessary pressure, filling time, and warpage. Include how these changes could influence the quality of the final part (for two different ply settings).
Use this template to prepare the report. It should include screenshots that display the process, simulation results and the impact of the aforementioned changes, along with a brief explanation.
Welcome students with Molex3D account too.
Please include the Google Drive screenshot URL of opened 'Easyperm_M.mfe' in Moldex 3D at the very beginning of your proposal. Proposal without screenshot cannot be considerd at all.
Thank you for your consideration.
This is urgent project needed to complete in a few hours and freelancers without Moldex 3D tools are not considered.
Part 1
Using Moldex 3D, simulate the Resin Transfer Molding (RTM) process for the prepared solid mesh and ply orientation (attached mfe and kpt files). Review the instructions provided in this link to complete the simulation work:
RTM Simulation Files.zipDownload RTM Simulation Files.zip
https://www.moldex3d.com/blog/tips-and-tricks/composite-2023-how-to-set-rtm-ply-layout-in-studio/Links to an external site.
Your analysis should address the following:
Optimize Pressure:Determine the ideal pressure required to completely fill the part without defects, ensuring no issues arise during the process.
Material Comparison:Select two different combinations of materials for the plies and resin. Run the simulation with consistent process parameters for each combination. Compare the results, focusing on the pressure required, filling time, and warpage. Consider material properties such as porosity and permeability in your evaluation.
Part 2
Use the attached step file and follow the instructions provided in this video to prepare the mesh and orientation needed to run an RTM simulation on the given geometry.
RTM Training.stpDownload RTM Training.stp
https://www.youtube.com/watch?v=xHehZITTSMMLinks to an external site.
Part 3 – Optional (you will receive 10% on your midterm exam grade by completing this part)
Use the mesh and ply orientation prepared in Part 2 and run an RTM simulation.
Impact of Ply Orientation: Modify the orientation of the plies and analyze the effects on the necessary pressure, filling time, and warpage. Include how these changes could influence the quality of the final part (for two different ply settings).
Use this template to prepare the report. It should include screenshots that display the process, simulation results and the impact of the aforementioned changes, along with a brief explanation.
Welcome students with Molex3D account too.
Please include the Google Drive screenshot URL of opened 'Easyperm_M.mfe' in Moldex 3D at the very beginning of your proposal. Proposal without screenshot cannot be considerd at all.
Thank you for your consideration.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.