IPhone compatible phone Case CAD
Budget / SalaryA$250–750
TypeFreelance project
LocationRemote
Posted1 hour ago
I need a production-ready 3D model (STEP format) for a silicone phone case that fits the upcoming iPhone 17/18 Pro Max. The key feature is a small wired headset that lives in a rear compartment: two earbuds share a single inline microphone and plug straight into the handset through a fixed USB-C connector molded into the case. When not in use, the cable must retract smoothly and park flush so the phone still sits flat on a table.
Scope
• Model the full silicone shell, the retractable spool or track that stores roughly one metre of cable, the rear compartment door or slider, and any rigid inserts needed to anchor the USB-C plug.
• Keep all parts tooling-ready for silicone over-molding plus the few hard-plastic components the mechanism will require.
• Make sure cut-outs align with Apple button and camera layouts and allow MagSafe rings to be over-molded later.
Deliverables
1. Clean, watertight STEP file of every part and the final assembly.
2. Exploded view or simple PDF drawing set that shows part names, basic dimensions, and suggested materials.
3. Short note on tolerances, draft angles, and cable path so a molder can quote without extra rework.
Acceptance
The model must open error-free in SolidWorks/Fusion 360, maintain ±0.2 mm accuracy on all external iPhone mating surfaces, and show a working retraction path that avoids sharp bends tighter than 6 mm. If you have experience with silicone injection tooling or similar retract mechanisms, let me know—those examples will help me gauge your approach.
Scope
• Model the full silicone shell, the retractable spool or track that stores roughly one metre of cable, the rear compartment door or slider, and any rigid inserts needed to anchor the USB-C plug.
• Keep all parts tooling-ready for silicone over-molding plus the few hard-plastic components the mechanism will require.
• Make sure cut-outs align with Apple button and camera layouts and allow MagSafe rings to be over-molded later.
Deliverables
1. Clean, watertight STEP file of every part and the final assembly.
2. Exploded view or simple PDF drawing set that shows part names, basic dimensions, and suggested materials.
3. Short note on tolerances, draft angles, and cable path so a molder can quote without extra rework.
Acceptance
The model must open error-free in SolidWorks/Fusion 360, maintain ±0.2 mm accuracy on all external iPhone mating surfaces, and show a working retraction path that avoids sharp bends tighter than 6 mm. If you have experience with silicone injection tooling or similar retract mechanisms, let me know—those examples will help me gauge your approach.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.