ESP32 Filter Controller PCB Design
Budget / Salary$30–250
TypeFreelance project
LocationRemote
Posted2 hours ago
IMPORTANT – BUDGET: This project must be completed within the budget stated in this listing. If you expect more than this budget range, please do not send a proposal.
We are looking for an experienced PCB designer to design a compact, 2-layer controller board based on the ESP32. The board will read multiple field sensors and communicate over Ethernet and Wi-Fi. It will be mounted inside a small, sealed plastic enclosure, so the board outline and mounting holes must follow fixed mechanical limits.
The complete design package (block diagram, enclosure drawings and 3D model, mechanical limits, logo files and a detailed design-notes document) will be shared only with the awarded freelancer after an NDA is signed.
Board overview
- MCU: ESP32-WROOM-32UE (external antenna version, U.FL connector)
- Power: 24 V DC input, with on-board 5 V and 3.3 V rails (switching regulators). Includes input protection: fuse, reverse-polarity protection and TVS.
- Connectivity: Ethernet (RJ45 with magnetics, SPI Ethernet controller such as W5500 preferred) and Wi-Fi
Field inputs (about 10 channels, via pluggable/screw terminal blocks):
- 3× dry-contact float switch inputs
- 3× non-contact liquid level sensor inputs (5–24 V type, digital output)
- 1× hall-effect flow meter (pulse input)
- 1× 2-wire water leak probe
- 1× DS18B20 temperature sensor (1-Wire)
- 1× 0.5–4.5 V analog pressure transducer
- Every field input needs proper protection and level shifting (ESD/TVS, filtering, voltage dividers or optocouplers where needed).
- Indicators: 1× RGB status LED and per-port indicator LEDs (specific LCSC part numbers will be provided)
- USB Type-C connector
- Programming/debug access (reset, boot and UART)
Mandatory design constraints
- 2-layer PCB only. 4-layer designs will not be accepted.
- All components on the TOP side only. No components on the bottom side.
- Board size about 71 × 56 mm (rectangular), with 4 corner mounting holes at fixed positions. Exact dimensions and an alternative outline will be provided from the enclosure manufacturer's drawings and 3D model.
- Mounting holes follow a specific style: plated hole with an exposed copper ring and a ring of stitching vias.
- Black solder mask (matte preferred) with white silkscreen.
- Power traces must be sized from a current budget, which you will document.
- A logo must be placed prominently on the silkscreen (vector file provided).
- Fixed layout zones: ESP32 on the left, terminal blocks along the right edge, USB-C at the top right, RJ45 at the bottom right.
What we expect from you
Component availability: Every component must be in stock in China (e.g., the LCSC / JLCPCB parts library or the chosen manufacturer's sourcing) at design time and again at ordering time. Out-of-stock, end-of-life or hard-to-source parts will not be accepted.
Independent AI review at every stage: At each stage (schematic, layout and manufacturing files), we will check your files with three different AI tools. We will send you a report of possible errors and suggested fixes. Verifying these findings and correcting the design is your responsibility. We only provide the report.
Manufacturing order up to payment: You are responsible for:
- generating the manufacturing files
- uploading them to our preferred manufacturing platform
- doing the final checks there (DFM, BOM matching, component positions and rotations in the assembly preview)
- bringing the order to the payment step
We will give you login credentials (username and password) for our account on that platform. The order will be created from our account, and we will make the payment ourselves.
- 3D model for mechanical check: As soon as the PCB layout is finished, send us the 3D model of the assembled board (STEP) with all components and correct heights. We will 3D-print it and check the mechanical fit in the enclosure. The manufacturing order will not be placed until this check is approved. Any fit issues we find must be corrected by you.
- Deadline: The agreed deadline must be met. Please quote only a timeline you can commit to.
Deliverables
1.) Schematic (PDF + native source files)
2.) PCB layout (native source files)
3.) Gerber and drill files, ready for manufacturing
4.) BOM with LCSC part numbers (all parts in stock in China), plus a pick-and-place (CPL) file for JLCPCB/PCBWay SMT assembly
5.) 3D STEP model of the assembled board, delivered right after layout and before manufacturing (for our 3D-printed fit check)
6.) Short design report: current budget, trace-width calculations, GPIO pin map
7.) Fixes for all issues in our AI review reports, at every stage
8.) Manufacturing + assembly order prepared on our account and brought to the payment step
9.) Support for one round of revisions after prototype feedback
Preferred tools
KiCad (preferred), EasyEDA Pro or Altium. Native source files must be delivered in all cases.
Requirements
- Proven experience with ESP32 hardware design (please share examples)
- Experience with industrial/field I/O protection and 24 V systems
- Experience designing boards for JLCPCB/PCBWay assembly
- Willingness to sign an NDA. All project files and the design are confidential, and all IP transfers to us.
To apply, please answer
- Which EDA tool will you use?
- Can you share 1–2 ESP32 boards you have designed (screenshots are fine)?
- How would you approach Ethernet on a 2-layer board with all components on one side?
- What is your estimated timeline for the first complete design (schematic + layout + Gerbers)?
Applications without answers to the questions above will not be considered.
Skills (Freelancer skill tags)
PCB Layout · Circuit Design · Electronics · ESP32 · KiCad · Embedded Systems · Altium
We are looking for an experienced PCB designer to design a compact, 2-layer controller board based on the ESP32. The board will read multiple field sensors and communicate over Ethernet and Wi-Fi. It will be mounted inside a small, sealed plastic enclosure, so the board outline and mounting holes must follow fixed mechanical limits.
The complete design package (block diagram, enclosure drawings and 3D model, mechanical limits, logo files and a detailed design-notes document) will be shared only with the awarded freelancer after an NDA is signed.
Board overview
- MCU: ESP32-WROOM-32UE (external antenna version, U.FL connector)
- Power: 24 V DC input, with on-board 5 V and 3.3 V rails (switching regulators). Includes input protection: fuse, reverse-polarity protection and TVS.
- Connectivity: Ethernet (RJ45 with magnetics, SPI Ethernet controller such as W5500 preferred) and Wi-Fi
Field inputs (about 10 channels, via pluggable/screw terminal blocks):
- 3× dry-contact float switch inputs
- 3× non-contact liquid level sensor inputs (5–24 V type, digital output)
- 1× hall-effect flow meter (pulse input)
- 1× 2-wire water leak probe
- 1× DS18B20 temperature sensor (1-Wire)
- 1× 0.5–4.5 V analog pressure transducer
- Every field input needs proper protection and level shifting (ESD/TVS, filtering, voltage dividers or optocouplers where needed).
- Indicators: 1× RGB status LED and per-port indicator LEDs (specific LCSC part numbers will be provided)
- USB Type-C connector
- Programming/debug access (reset, boot and UART)
Mandatory design constraints
- 2-layer PCB only. 4-layer designs will not be accepted.
- All components on the TOP side only. No components on the bottom side.
- Board size about 71 × 56 mm (rectangular), with 4 corner mounting holes at fixed positions. Exact dimensions and an alternative outline will be provided from the enclosure manufacturer's drawings and 3D model.
- Mounting holes follow a specific style: plated hole with an exposed copper ring and a ring of stitching vias.
- Black solder mask (matte preferred) with white silkscreen.
- Power traces must be sized from a current budget, which you will document.
- A logo must be placed prominently on the silkscreen (vector file provided).
- Fixed layout zones: ESP32 on the left, terminal blocks along the right edge, USB-C at the top right, RJ45 at the bottom right.
What we expect from you
Component availability: Every component must be in stock in China (e.g., the LCSC / JLCPCB parts library or the chosen manufacturer's sourcing) at design time and again at ordering time. Out-of-stock, end-of-life or hard-to-source parts will not be accepted.
Independent AI review at every stage: At each stage (schematic, layout and manufacturing files), we will check your files with three different AI tools. We will send you a report of possible errors and suggested fixes. Verifying these findings and correcting the design is your responsibility. We only provide the report.
Manufacturing order up to payment: You are responsible for:
- generating the manufacturing files
- uploading them to our preferred manufacturing platform
- doing the final checks there (DFM, BOM matching, component positions and rotations in the assembly preview)
- bringing the order to the payment step
We will give you login credentials (username and password) for our account on that platform. The order will be created from our account, and we will make the payment ourselves.
- 3D model for mechanical check: As soon as the PCB layout is finished, send us the 3D model of the assembled board (STEP) with all components and correct heights. We will 3D-print it and check the mechanical fit in the enclosure. The manufacturing order will not be placed until this check is approved. Any fit issues we find must be corrected by you.
- Deadline: The agreed deadline must be met. Please quote only a timeline you can commit to.
Deliverables
1.) Schematic (PDF + native source files)
2.) PCB layout (native source files)
3.) Gerber and drill files, ready for manufacturing
4.) BOM with LCSC part numbers (all parts in stock in China), plus a pick-and-place (CPL) file for JLCPCB/PCBWay SMT assembly
5.) 3D STEP model of the assembled board, delivered right after layout and before manufacturing (for our 3D-printed fit check)
6.) Short design report: current budget, trace-width calculations, GPIO pin map
7.) Fixes for all issues in our AI review reports, at every stage
8.) Manufacturing + assembly order prepared on our account and brought to the payment step
9.) Support for one round of revisions after prototype feedback
Preferred tools
KiCad (preferred), EasyEDA Pro or Altium. Native source files must be delivered in all cases.
Requirements
- Proven experience with ESP32 hardware design (please share examples)
- Experience with industrial/field I/O protection and 24 V systems
- Experience designing boards for JLCPCB/PCBWay assembly
- Willingness to sign an NDA. All project files and the design are confidential, and all IP transfers to us.
To apply, please answer
- Which EDA tool will you use?
- Can you share 1–2 ESP32 boards you have designed (screenshots are fine)?
- How would you approach Ethernet on a 2-layer board with all components on one side?
- What is your estimated timeline for the first complete design (schematic + layout + Gerbers)?
Applications without answers to the questions above will not be considered.
Skills (Freelancer skill tags)
PCB Layout · Circuit Design · Electronics · ESP32 · KiCad · Embedded Systems · Altium
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.