Dual-Modem RTU with ST MCU,RS232,RS485,USB,LAN PORt
Budget / SalaryHourly project
TypeFreelance project
LocationRemote
Posted1 hour ago
I need a reliable RTU built around a single ST microcontroller that can gather field sensor data and push it to my server. The unit will carry two cellular modems, each with its own SIM; normally it works through the primary link and automatically falls back to the secondary one if the first drops out. No simultaneous transmissions are required—just seamless fail-over for better coverage.
Here is what I expect from you:
• Hardware design files (schematic, PCB, BOM) integrating the ST MCU, two modems, dual-SIM routing, power regulation and the usual sensor, IO and debug headers.
• Production-ready firmware that reads a small set of analogue and digital inputs, packages the values in JSON or a simple binary frame, and posts them over MQTT/HTTPS at a fixed interval. The code must detect a loss of service, switch to the standby modem, and resume publishing without resetting the MCU.
• A short configuration utility or documented CLI commands to set APNs, server address, publish interval and watchdog timers.
• Test report showing switchover latency and successful data delivery on both SIMs.
I am comfortable reviewing work in Altium or KiCad and prefer code in STM32CubeIDE with HAL. If you would rather use bare-metal or an RTOS, note that in your proposal. Let me know how many weeks you need for a first prototype and what support hardware you will require from me.
Here is what I expect from you:
• Hardware design files (schematic, PCB, BOM) integrating the ST MCU, two modems, dual-SIM routing, power regulation and the usual sensor, IO and debug headers.
• Production-ready firmware that reads a small set of analogue and digital inputs, packages the values in JSON or a simple binary frame, and posts them over MQTT/HTTPS at a fixed interval. The code must detect a loss of service, switch to the standby modem, and resume publishing without resetting the MCU.
• A short configuration utility or documented CLI commands to set APNs, server address, publish interval and watchdog timers.
• Test report showing switchover latency and successful data delivery on both SIMs.
I am comfortable reviewing work in Altium or KiCad and prefer code in STM32CubeIDE with HAL. If you would rather use bare-metal or an RTOS, note that in your proposal. Let me know how many weeks you need for a first prototype and what support hardware you will require from me.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.