Design LoRaWAN RTU & concentrator With RS232/485
Budget / Salary₹37,500–75,000
TypeFreelance project
LocationRemote
Posted3 hours ago
I need an experienced embedded engineer to design and program a long-range LoRaWAN remote terminal unit that can both monitor field sensors and issue remote control commands. The unit must expose one RS-232 and one RS-485 interface so it can collect data from legacy instruments while also talking Modbus devices and driving actuators.
Core expectations
• Stable LoRaWAN Class A/C operation over several kilometres in open field conditions.
• Dual-purpose firmware: periodic sensor polling plus immediate downlink command handling with confirmable acknowledgements.
• Hardware design ready for manufacture, including schematic, PCB layout, BOM and enclosure recommendations.
• Clean, well-documented code (C/C++ or Embedded C) that I can recompile in STM32CubeIDE or a similarly accessible toolchain.
• Simple configuration utility or serial AT command set for network keys, baud rates and register maps.
Acceptance criteria
1. Prototype demonstrates successful data uplink and downlink in a real gateway network.
2. RS-232 and RS-485 ports are verified with test devices for both polling and control commands.
3. Source files compile without warnings and handover package is complete.
Time is critical—I would like to see the first working prototype and compiled firmware as soon as possible, so please outline a realistic schedule when you respond.
Core expectations
• Stable LoRaWAN Class A/C operation over several kilometres in open field conditions.
• Dual-purpose firmware: periodic sensor polling plus immediate downlink command handling with confirmable acknowledgements.
• Hardware design ready for manufacture, including schematic, PCB layout, BOM and enclosure recommendations.
• Clean, well-documented code (C/C++ or Embedded C) that I can recompile in STM32CubeIDE or a similarly accessible toolchain.
• Simple configuration utility or serial AT command set for network keys, baud rates and register maps.
Acceptance criteria
1. Prototype demonstrates successful data uplink and downlink in a real gateway network.
2. RS-232 and RS-485 ports are verified with test devices for both polling and control commands.
3. Source files compile without warnings and handover package is complete.
Time is critical—I would like to see the first working prototype and compiled firmware as soon as possible, so please outline a realistic schedule when you respond.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.