CNC Pocket Test G-Code
Budget / Salary$10–30
TypeFreelance project
LocationRemote
Posted51 minutes ago
I’m getting my CNC router dialed in and need a quick test gcode file created using VCarve Pro 11.0: A simple 3" square toolpath that clears a 1" pocket in a piece of 1.5" HDU foam. No through-cuts—just enough depth to verify accuracy, step-over, and machine tuning.
For this test I need the bit to first run a complete outline of the square then clear the inside 1/4" down in a horizontal (X axis) direction, then the second pass 1/4" lower to run a complete outline of the square again then clear the inside in a vertical pass (Y axis), 3 pass in the X axis and last pass in the Y axis. Feel free to suggest feeds, speeds, and step-downs for a typical ¼-inch ballend mill in HDU, and include them in the header so I can tweak if necessary.
Tools and Equipment:
Two Trees 6050: https://tinyurl.com/nhfa6zbp
Ballnose Bit used: https://tinyurl.com/5b66jr3e
Deliverables
• One ready-to-run .gcode (or .nc) file for the rectangular pocket
• Datum position: Front Left.
• Z position: Surface
• Spindle speed prefered 12,000 max.
• VCarve 11.0 file
• A short note listing cutter size, pocket depth, feed/speed values, and overall pocket dimensions
I’ll load the file, run it, measure the pocket, and release payment once it cuts cleanly and the rectangle is square within expected tolerances.
For this test I need the bit to first run a complete outline of the square then clear the inside 1/4" down in a horizontal (X axis) direction, then the second pass 1/4" lower to run a complete outline of the square again then clear the inside in a vertical pass (Y axis), 3 pass in the X axis and last pass in the Y axis. Feel free to suggest feeds, speeds, and step-downs for a typical ¼-inch ballend mill in HDU, and include them in the header so I can tweak if necessary.
Tools and Equipment:
Two Trees 6050: https://tinyurl.com/nhfa6zbp
Ballnose Bit used: https://tinyurl.com/5b66jr3e
Deliverables
• One ready-to-run .gcode (or .nc) file for the rectangular pocket
• Datum position: Front Left.
• Z position: Surface
• Spindle speed prefered 12,000 max.
• VCarve 11.0 file
• A short note listing cutter size, pocket depth, feed/speed values, and overall pocket dimensions
I’ll load the file, run it, measure the pocket, and release payment once it cuts cleanly and the rectangle is square within expected tolerances.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.