Automatic Fish Feeder Design
Budget / Salary$30–250
TypeFreelance project
LocationRemote
Posted53 minutes ago
# Project: Automatic Fish Feeder with Timer-Controlled Opening and Closing Mechanism
## 1. Project Overview
I am looking for a mechanical/electrical designer to develop a simple and affordable Automatic Fish Feeder for fish farming.
I already have a basic design concept and some reference images. However, I am open to modifying the existing design to achieve a more practical, reliable and cost-effective system.
The main objective is to automatically release fish pellets at programmed feeding times using a simple electrical timer and an opening/closing mechanism.
## 2. Main Design Requirements
The proposed feeder should consist of:
1. **Feed Hopper:** An existing 5-gallon (19-litre) plastic water dispenser bottle installed upside down to store fish pellets.
2. **Feeder Housing:** A rectangular Stainless Steel 304 housing containing the feeding mechanism.
3. **Automatic Opening/Closing Mechanism:** A simple mechanism that opens the feed outlet when activated and automatically closes it after a preset duration. A spring-return sliding gate with a 12V DC solenoid actuator is one possible solution.
4. **Digital Timer:** An external plug-in programmable digital timer to control the feeding schedule. It should allow multiple feeding times per day.
5. **Electrical Components:** Simple and affordable components such as:
- Plug-in digital timer.
- 12V DC power adapter.
- 12V one-shot timer relay.
- 12V DC solenoid actuator.
- Suitable fuse and wiring.
6. **Feed Outlet:** A suitable outlet and stainless-steel spreader to distribute pellets into the fish tank.
7. **Support Frame:** A simple Stainless Steel 304 frame to support the feeder above the fish tank.
## 3. Working Principle
The proposed operating sequence is:
1. Fish pellets are stored inside the inverted water bottle.
2. The digital timer activates the system at the programmed feeding time.
3. The 12V solenoid actuator opens the feed outlet.
4. Fish pellets are released into the tank.
5. After a preset duration (approximately 1–5 seconds), the actuator switches off.
6. A return spring automatically closes the outlet.
The opening duration and feed quantity should be adjustable.
## 4. Proposed Electrical Connection
The preferred electrical arrangement is:
240V AC Wall Socket → Digital Programmable Timer → 12V DC Power Adapter → One-Shot Timer Relay → 12V DC Solenoid Actuator.
The one-shot timer relay should activate the solenoid for a short period at each scheduled feeding time.
I prefer a simple system without Arduino, complicated programming or expensive electronic controllers.
## 5. Materials
- Stainless Steel 304: Main housing, support frame and outlet.
- Food-grade plastic: Feed gate or metering components.
- Existing 5-gallon plastic water bottle: Feed hopper.
- Stainless steel and suitable spring material: Opening/closing mechanism.
## 6. Required Deliverables
Please provide:
1. Complete 3D CAD design.
2. Front, side and top engineering drawings.
3. Detailed dimensions of all components.
4. Internal mechanism and sectional drawings.
5. Electrical wiring diagram.
6. Exploded assembly drawing.
7. Bill of Materials (BOM).
8. Manufacturing-ready PDF and STEP files.
## 7. Important Design Considerations
- Keep the design simple and cost-effective.
- Easy to manufacture and assemble.
- Easy to clean and maintain.
- Prevent fish pellets from getting stuck.
- Ensure the gate closes properly after every feeding cycle.
- Allow adjustment of feeding quantity.
- Suitable for humid fish-farming environments.
- Use readily available electrical and mechanical components.
## 8. Design Flexibility
I am open to changing the existing rotating-disc mechanism if there is a simpler and more reliable alternative.
The priority is not to maintain the original mechanism, but to achieve the main objective: **automatically opening and closing the feed outlet at programmed times to dispense a controlled quantity of fish pellets.**
Please review my reference images and propose the simplest practical design. I would appreciate your recommendations, quotation and estimated completion time before proceeding.
## 1. Project Overview
I am looking for a mechanical/electrical designer to develop a simple and affordable Automatic Fish Feeder for fish farming.
I already have a basic design concept and some reference images. However, I am open to modifying the existing design to achieve a more practical, reliable and cost-effective system.
The main objective is to automatically release fish pellets at programmed feeding times using a simple electrical timer and an opening/closing mechanism.
## 2. Main Design Requirements
The proposed feeder should consist of:
1. **Feed Hopper:** An existing 5-gallon (19-litre) plastic water dispenser bottle installed upside down to store fish pellets.
2. **Feeder Housing:** A rectangular Stainless Steel 304 housing containing the feeding mechanism.
3. **Automatic Opening/Closing Mechanism:** A simple mechanism that opens the feed outlet when activated and automatically closes it after a preset duration. A spring-return sliding gate with a 12V DC solenoid actuator is one possible solution.
4. **Digital Timer:** An external plug-in programmable digital timer to control the feeding schedule. It should allow multiple feeding times per day.
5. **Electrical Components:** Simple and affordable components such as:
- Plug-in digital timer.
- 12V DC power adapter.
- 12V one-shot timer relay.
- 12V DC solenoid actuator.
- Suitable fuse and wiring.
6. **Feed Outlet:** A suitable outlet and stainless-steel spreader to distribute pellets into the fish tank.
7. **Support Frame:** A simple Stainless Steel 304 frame to support the feeder above the fish tank.
## 3. Working Principle
The proposed operating sequence is:
1. Fish pellets are stored inside the inverted water bottle.
2. The digital timer activates the system at the programmed feeding time.
3. The 12V solenoid actuator opens the feed outlet.
4. Fish pellets are released into the tank.
5. After a preset duration (approximately 1–5 seconds), the actuator switches off.
6. A return spring automatically closes the outlet.
The opening duration and feed quantity should be adjustable.
## 4. Proposed Electrical Connection
The preferred electrical arrangement is:
240V AC Wall Socket → Digital Programmable Timer → 12V DC Power Adapter → One-Shot Timer Relay → 12V DC Solenoid Actuator.
The one-shot timer relay should activate the solenoid for a short period at each scheduled feeding time.
I prefer a simple system without Arduino, complicated programming or expensive electronic controllers.
## 5. Materials
- Stainless Steel 304: Main housing, support frame and outlet.
- Food-grade plastic: Feed gate or metering components.
- Existing 5-gallon plastic water bottle: Feed hopper.
- Stainless steel and suitable spring material: Opening/closing mechanism.
## 6. Required Deliverables
Please provide:
1. Complete 3D CAD design.
2. Front, side and top engineering drawings.
3. Detailed dimensions of all components.
4. Internal mechanism and sectional drawings.
5. Electrical wiring diagram.
6. Exploded assembly drawing.
7. Bill of Materials (BOM).
8. Manufacturing-ready PDF and STEP files.
## 7. Important Design Considerations
- Keep the design simple and cost-effective.
- Easy to manufacture and assemble.
- Easy to clean and maintain.
- Prevent fish pellets from getting stuck.
- Ensure the gate closes properly after every feeding cycle.
- Allow adjustment of feeding quantity.
- Suitable for humid fish-farming environments.
- Use readily available electrical and mechanical components.
## 8. Design Flexibility
I am open to changing the existing rotating-disc mechanism if there is a simpler and more reliable alternative.
The priority is not to maintain the original mechanism, but to achieve the main objective: **automatically opening and closing the feed outlet at programmed times to dispense a controlled quantity of fish pellets.**
Please review my reference images and propose the simplest practical design. I would appreciate your recommendations, quotation and estimated completion time before proceeding.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.