30-Foot Sump Pipe Burial

via Freelancer ·

Budget / Salary$30–250
TypeFreelance project
LocationRemote
Posted1 hour ago
I need a 1.5-inch sump discharge line set below my lawn, starting at the exterior wall where the current outlet ends and running roughly 30 ft out to the nearby drainage ditch / storm drain. The route is almost entirely open grass and loose soil, so access is easy and there are no known roots, rocks, or buried utilities in the way.

Scope of work
• Excavate a shallow trench—about 4 inches of cover once back-filled—maintaining a steady slope so the water clears properly into the ditch. Reuse rectangular excavated grass clumps.
• Lay and secure the 1.5″ pipe (PVC or corrugated sump hose is fine). I only need the burial: I will handle the actual tie-in to the pump outlet myself.
• Back-fill, tamp, and re-grade so the lawn looks tidy when you leave; seed or patch sod where you cut it.

Acceptance criteria
• Continuous 30 ft run with at least 4″ of soil above the pipe.
• Consistent fall toward the drainage ditch—no low spots that could hold water.
• Surface restored flush with surrounding yard, free of trip hazards or deep ruts.

If you have a power trencher you can be in and out quickly, but hand-digging is perfectly acceptable given the shallow depth. Please include an estimated timeline and any questions about materials or site conditions when you reply.
project management civil engineering excavation landscaping landscape design environmental engineering plumbing construction construction management
Apply on Freelancer →

Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.