2-layer ESP32 PCB design review before fabrication (KiCad)
Budget / Salary$30–60
TypeFreelance project
LocationRemote
Posted2 hours ago
We need an experienced hardware engineer to review a 2-layer PCB (schematic + layout) before we order 5 assembled prototypes at JLCPCB.
Board: 2-layer, 110 x 85 mm, 1.6 mm, KiCad 9. DRC and ERC are clean; we want a second pair of eyes on the design itself.
Main blocks:
- ESP32-WROOM-32E module (antenna keep-out and board-edge placement)
- 5 V USB-C input, TVS, PTC and TPS259470 eFuse (UVLO/OVLO divider, current limit, dV/dt)
- 1117-type 3.3 V LDO (thermal margin)
- CH340C USB-UART with EN/IO0 auto-program circuit, USB ESD protection, USB-C CC resistors
- 4x 74HCT245 level shifters (3.3 V GPIO to 5 V) driving 2x HUB75 and 2x HUB12 LED panel connectors
- DS3231 RTC with CR2032 backup, I2C pull-ups
- MT3608 5 V to 12 V boost driving a horn through an N-MOSFET low-side switch
Deliverable: a written review covering schematic and layout, listing concrete issues with designator/net, a short explanation and a severity (critical / should fix / minor). Delivery within 3 days of receiving the files.
Files shared with the awarded freelancer only: KiCad project, Gerber, BOM, CPL (pick-and-place), schematic PDF.
In your bid please state:
1) Your experience with ESP32 boards (designs you have reviewed or built)
2) Your experience with JLCPCB assembly (BOM/CPL, part rotation issues)
3) Your delivery time
Fixed price. No design changes needed from you, only the review.
Board: 2-layer, 110 x 85 mm, 1.6 mm, KiCad 9. DRC and ERC are clean; we want a second pair of eyes on the design itself.
Main blocks:
- ESP32-WROOM-32E module (antenna keep-out and board-edge placement)
- 5 V USB-C input, TVS, PTC and TPS259470 eFuse (UVLO/OVLO divider, current limit, dV/dt)
- 1117-type 3.3 V LDO (thermal margin)
- CH340C USB-UART with EN/IO0 auto-program circuit, USB ESD protection, USB-C CC resistors
- 4x 74HCT245 level shifters (3.3 V GPIO to 5 V) driving 2x HUB75 and 2x HUB12 LED panel connectors
- DS3231 RTC with CR2032 backup, I2C pull-ups
- MT3608 5 V to 12 V boost driving a horn through an N-MOSFET low-side switch
Deliverable: a written review covering schematic and layout, listing concrete issues with designator/net, a short explanation and a severity (critical / should fix / minor). Delivery within 3 days of receiving the files.
Files shared with the awarded freelancer only: KiCad project, Gerber, BOM, CPL (pick-and-place), schematic PDF.
In your bid please state:
1) Your experience with ESP32 boards (designs you have reviewed or built)
2) Your experience with JLCPCB assembly (BOM/CPL, part rotation issues)
3) Your delivery time
Fixed price. No design changes needed from you, only the review.
Apply on Freelancer →
Project sourced from Freelancer.com. Applications happen directly on the original platform — we never collect your data.